Thermal imaging (sometimes called thermal-scanning or infrared-scanning) locates areas of abnormal heating.  As overheating of electrical equipment is a prime cause of failure it is important to detect and correct early. Over heating is caused by either loose or poor electrical connections or overloads.  By using thermal imaging equipment we can locate potential trouble spots which would not be visible to the naked eye.   The testing is done while the facility is under load, meaning in full operation.  Where an abnormality is detected, the circuit in question will be amp checked to narrow down the cause.  Areas that need to be addressed are noted with the recommended corrective action and urgency.  We do provide the added benefit of having an electrician present for the scan to correct any abnormalities that can be corrected right away.  We can then take another image of the equipment that day to ensure the problem was handled.      CALL 323.255.6563 or Request Service Online